Ingersoll-Rand SRV125F Bedienungsanleitung PDF herunterladen

P7630 Edition 1

Form P7648

Edition 1

August 2004

CCN 04579728

Operation and Maintenance Manual

for

Series SRV125F

Starter Relay Valve

Series SRV125F Starter Relay valves are designed for controlling fluid flow in conjunction with Air Starting

Systems

• IMPORTANT SAFETY INFORMATION ENCLOSED - SAVE THESE INSTRUCTIONS.

•

Read and understand this manual before operating Valve.

• Failure to observe the following warnings could result in injury.

PLACING THE VALVE IN SERVICE

• Always install, operate, inspect and maintain this prod-

uct in accordance with all applicable standards and reg-

ulations (local, state, country, federal, etc.).

• Always use clean, dry air at a pressure which does not

exceed the pressure rating listed on the valve.

• Do not use damaged, frayed or deteriorated air hoses &

fittings.

• Always turn off the air and disconnect the air hose

before installing, removing or adjusting any accessory

on this valve, or before performing any maintenance on

this valve or accessory.

• Do not lubricate the valve with flammable or volatile

liquids such as kerosene, diesel or jet fuel, use only

recommended lubricants.

• Series SRV125F Valves are not designed for working

in explosive atmospheres.

• Do not remove any labels, replace any damaged labels.

• Operate this valve only when properly installed in the

Air Starting System.

• Always bleed off the air pressure before attempting to

remove the Starter Relay Valve from the Receiver or

before attempting to perform any maintenance on the

Starter Relay Valve.

• Never attempt to remove the Retaining Ring (12) from

the bottom side of the Starter Relay Valve until the air

pressure has bled off. If the Retaining Ring is removed

while there is pressure in the Receiver, internal parts of

the Starter Relay Valve will be blown out with consid-

erable force.

• Use only recommended Ingersoll-Rand accessories.

NOTICE

WARNING

Refer All Communications to the Nearest

Ingersoll-Rand Office or Distributor.

Printed in U.S.A

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Starter Relay Valve

1P7630 Edition 1Form P7648Edition 1August 2004CCN 04579728Operation and Maintenance ManualforSeries SRV125FStarter Relay ValveSeries SRV125F Starter R

Seite 2 - WARNING SYMBOL IDENTIFICATION

2P7648 Edition 1USING THE VALVE• This product is not designed for working in explosive environments, including those caused by fumes & dust, or ne

Seite 3 - P7648 Edition 1

3P7648 Edition 1EXPLODED VIEW AND PARTS LIST (Dwg. TP2184)Item Part Description Part Number Item Part Description Part Number1 Valve Housing . . . .

Seite 4 - OPTIONAL EQUIPMENT

4P7648 Edition 1OPTIONAL EQUIPMENT(Dwg. TP2212)Item Part Description Part Number Item Part Description Part NumberSolenoid and Mounting Hardware - Pos

Seite 5 - Installation

5P7648 Edition 1PLACING THE STARTER RELAY VALVE IN SERVICEAlways wear eye protection when performing any mainte-nance on this valve.Pre-Installation1.

Seite 6 - MAINTENANCE

6P7648 Edition 1MAINTENANCEAlways wear eye protection when lubricating or performing maintenance on the Starter Relay Valve. Always bleed off the air

Seite 7 - P7648 Edition 1 7

P7648 Edition 1 7 NOTES

Seite 8 - Asia/Pacific

8 P7648 Edition 1SERVICE CENTERSWeb: www.irtools.com/techdocumentsUnited StatesIR ESS Customer Service /DistributionCenterP.O. Box 618510 Hester Drive